Analytical 600 bar Syringe Injection Valve
Our Analytic 600 Bar Syringe Injection Valve is a manual front loading injection. This valve is designed with our unique Make-Before-Break (MBB®) architecture. This feature allows continuous flow between LOAD and IN-JECT positions. It is specifically set to 600 bar. It has 2-positions and 6-port.
|Thread Port Configuration Coned||10-32|
|Material||Stainless Steel, Alumina, PEEK-based plastic|
|Pressure Rating Max (psi)||8700|
|Pressure Rating Max (bar)||600|
|For Tubing OD (in)||1/16|
|Valve Type||Dual Mode w/MBB, Position Sensor|