Semrock’s LED-based light engine filter sets are designed to use common excitation filters between single-band and corresponding multiband configurations to simplify interchangeability when installing the excitation filters into the light engine. This not only provides seamless transition between using single-band and multiband filter sets but also provides significant cost savings.
This 7-filter "Sedat" triple-band set is designed for high-speed, sequential imaging of CFP, YFP, and mCherry (and other key fluorophores – see complete list above). This set has been designed to deliver significant fluorescence signal improvements for LED-based light engines compared with traditional sets designed for standard broadband light sources such as mercury or xenon arc lamps. The complete set is comprised of a triple-band beamsplitter with three single-band emitters intended to be mounted in filter wheels and three single-band exciters which can be installed into the LED light engine or mounted in filter wheels.
Interested in learning how this filter set will perform with your light source? Try Semrock's SearchLight plotting & calculation tool.
-
EachUS Domestic pricing – contact your local distributor for other currency list prices
-
2,780.00 USD EachUS Domestic pricing – contact your local distributor for other currency list prices
-
-
0.000.00 -
-
- Notify me when available
Filter set mounted in microscope holders/cubes found below in related products section.
Set Components
FF01-482/25-25FL-004256
Each
|
FL-004256 |
|
FF01-509/22-25FL-004258
Each
|
FL-004258 |
|
FF01-544/24-25FL-004684
Each
|
FL-004684 |
|
FF01-578/21-25FL-004616
Each
|
FL-004616 |
|
FF02-438/24-25FL-004649
Each
|
FL-004649 |
|
FF02-641/75-25FL-004436
Each
|
FL-004436 |
|
FF459/526/596-Di01-25x36FL-007091
Each
|
FL-007091 |
total selected
Clear selection
Select all 7 products from all pages.
LED-CFP/YFP/mCherry-3X3M-A-NQF
S-419505 / 0
This set is delivered mounted in microscope filter holder, often called 'cube', ready for your microscope.
Nikon Quadfluor for microscopes: E200, E400, E600, E800, E1000, TS100, TS100F, TE200, TE300, ME600L, L150A, and some Labophot, Optiphot, and Diaphot series
LED-CFP/YFP/mCherry-3X3M-A-NTE
S-000299 / 0
This set is delivered mounted in microscope filter holder, often called 'cube', ready for your microscope.
Nikon TE 2000 for microscopes: TE 2000, 50i, 55i, 80i, 90i, Eclipse Ti, Ni, and Ci series, and any using the Epi-fluor Illuminator
LED-CFP/YFP/mCherry-3X3M-A-OMF
S-000657 / 0
This set is delivered mounted in microscope filter holder, often called 'cube', ready for your microscope.
Olympus U-MF2 for microscopes: AX70, BX, BX41, BX50, BX51, BX60, BX61, BX50/51WI, BX60/61WI, IX50, IX51, IX70, IX71, IX81
LED-CFP/YFP/mCherry-3X3M-A-ZHE
S-000300 / 0
This set is delivered mounted in microscope filter holder, often called 'cube', ready for your microscope.
Zeiss FL Cube EC P+C for microscopes: Axio Imager, Axiostar Plus, Axioskop 40, Axioskop 2 (post-2001), Axioplan 2i, Axioplan 2ie, Axiovert 200, Axiovert 40, Axio Observer, Axio Examiner and Axio Scope A1
LED-CFP/YFP/mCherry-3X3M-A-OFF
S-001137 / 0
This set is delivered mounted in microscope filter holder, often called 'cube', ready for your microscope.
Olympus U-FF for microscopes: BX53, BX63
LED-CFP/YFP/mCherry-3X3M-A-LDMK
S-001643 / 0
This set is delivered mounted in microscope filter holder, often called 'cube', ready for your microscope.
Leica DM-K for microscopes: DM-2000, DM-2500, DM-3000, DMI3000 B, DM-4000, DMI4000 B, DM-5000, DM-5500, DM-6000, DMI6000 B, DM4 and DM6
LED-CFP/YFP/mCherry-3X3M-A-LDMP
S-001644 / 0
This set is delivered mounted in microscope filter holder, often called 'cube', ready for your microscope.
Leica DMi8 (P-Cube) for microscopes: DMi8