Preparative Injection Valve
This Preparative Injection Valve is designed using our unique MBB “Make-Before-Break” architecture. Manufactured from biocompatible PEEK it offers optimal solvent resistance. Sample is loaded through the front of the valve using a syringe. A 10 mL sample loop is connected between ports 1 and 4. It includes a position sensing switch. It is for large bore passages and has 2 position and 6-ports.
|Thread Port Configuration Coned||5/16-24|
|Pressure Rating Max (psi)||3000|
|Pressure Rating Max (bar)||207|
|For Tubing OD (in)||1/8|
|Valve Type||Dual Mode w/Position Sensor|